blankblank blank

Ulysse Gizmo: Android MultiSensor App

Application Name: Ulysse Gizmo

Description: Multiple sensor data output, including GPS and compass.

Publisher’s website: Binary Toys

Cost: Free

Version/date reviewed: v.1.6  /  12-7-10

Phone/OS: Droid X / Android 2.2

Android Market link (mobile app only)
Android Market link (browser)

One thing you’ll immediately notice about Ulysse Gizmo is the “fit and finish”; in terms of visual presentation, it’s one of the more outstanding Android apps of its kind I’ve seen, at least in its default “visual style”. It displays GPS, magnetic and orientation data in four different displays; each one has excellent context-sensitive help.


Figure 1: The magnetic field sensor shows field strength, and the theoretical/actual magnetic strength/direction, along with the local magnetic declination (deviation of magnetic north from true north). More of a science toy than anything else, though I suppose you could use it to detect abnormal magnetic fields.

The icons at the edges represent the other sensor displays, and show actual active data readings. If I tap on the one at lower-left


Figure 2: … a nice bubble level shows up, with pitch/roll/slope orientation data displayed; I wish it also had a readout of the total slope angle along the orientation, but that’s a minor quibble. A quick tap zeroes out the level, while a longer one resets the zero level completely. The bubble level is the default view; if you tip the unit on one of its edges, say a long edge, and do a long press on the level …


Figure 3: It turns into an inclinometer, displaying total angle of rotation, and % slope.


Figure 4: GPS mode displays a sky map of satellite positions, with coordinate data in the box at upper right. Latitude/longitude in DMS is the default option, but you can switch to decimal degrees, UTM or MGRS in the setting section. If you tap on the coordinate box, it will cycle through the coordinate view, a geocoded address readout where available, and …


Figure 5: … a GPS satellite/signal info box. It’s on the small side but packs a lot of readable data into that small space. Here, I’ve changed the visual style from the default to the alternative “Mil-tech” as a comparison to the default style seen above. I personally much prefer the default style, but this alternate might be more readable for some people. There are also day/night color options for both visual styles available from the Menu.


Figure 6: Finally, compass mode. This has been vastly improved from earlier versions, which didn’t include a permanent “Heading” readout. Red needle always points towards true north, blue towards magnetic north; the numbers at top represent the counter-clockwise deviation from north, not the actual heading, which is a bit confusing. But the true heading (and orientation) are always visible in the center. Tapping once on the compass sets the current heading as a direction bearing, aiding in navigating in a constant direction; a long press resets that bearing.

The original version of this review before publication noted that there was a setting for waypoints, but it hadn’t been implemented. Just a few hours before scheduled publication, that changed …

Figure 7: From the menu on the compass page, choose the “Waypoint” option, and you’ll get a local map. A long press on the map at any location will place a waypoint there, and you’ll see info about the waypoint (bearing, distance, coordinates) at the top

Figure 8: Tap and drag on a waypoint lets you relocate it, and brings up a magnified view of the area under the waypoint – a nice touch, since your finger will block that part of the map as you’re moving the waypoint.

Figure 9: Returning to the compass page, the info box now includes data on the waypoint. There’s also now a small white circle on the edge of the compass ring, which shows the bearing direction towards that waypoint. You can remove the waypoint from an option in the waypoint menu, and also “link the bearing” to the waypoint; that will make the bearing display inside the compass correspond to the bearing to the waypoint.

Other Issues:

None – worked fine.

Final thoughts:

Ulysse Gizmo is a  visually-appealing app that shows off the Android sensors nicely. I prefer other apps for GPS status and coordinate data, and I don’t really see any need on my part for a magnetic field sensor. But the orientation app, especially the inclinometer option, is really nice, and the compass’s ability to let you set a bearing is useful. The author was very responsive to suggestions and bugs, and is working on adding additional features. Recommended.

Looking for something else? Enter some keywords below, then click "Search".    

2 Responses to “Ulysse Gizmo: Android MultiSensor App”

  1. 1 Epicanis

    Latitude/longitude in DMS is the only option; I wish there were other options, at the very least decimal degrees (I hate degree-minute-second data!).

    I sometimes think I’m the only one who feels this way – glad to know I’m not!

    I think the Ancient Babylonian “Degrees/Minutes/Seconds” thing needs to die already. I find it a heck of a lot easier to work with simple decimal values.

    I’m still not sure what to think about the increasing use of bastardized “Degress/Minutes.DecimalMinutes” notation…

  2. 2 Peter Guth

    I agree that decimal degrees is really the best solution. Anything else creates a real challenge to write a parser to interpret, since there is no standard for how to indicate the minutes and maybe seconds, and thus becomes a real pain to get into the computer.

    The problem becomes especially acute when you pass coordinates to someone, say in France, and the period is not what they expect for the decimal separator, and they come up with creative interpretations of your simple decimal degrees.

Comments are currently closed; feel free to contact me with questions/issues.